Smart Technologies SMART Audio 340 - Manual (Page 45)

Setting microphone features
The Microphones tab enables you to do the following:
l
Set a low battery microphone status light indicator.
l
Enable automatic shut off when charging.
l
Disable the buttons on the microphone.
l
Enable auxiliary audio input device volume control from the microphone.
l
Enable you to reduce the volume of audio input devices at the control unit when you are
speaking into the microphone.
l
Designate a response for quickly pressing the Soft button.
l
Designate a response for pressing and holding the Soft button.
I M P O R T A N T
After you use SMART Audio configuration software to upload the microphone settings to a control
unit, you must download them from the control unit to each microphone by pressing the Volume
Up and Volume Down buttons for four seconds.
Setting the low battery indication
By default, the microphone status light doesn’t flash to indicate a low battery. You can program the
microphone status light to flash when the battery is low.
l
At 10% battery charge the light flashes red twice per second.
l
At 5% battery charge the light flashes red four times per second.
g To set the low battery indication light to flash
Select Low battery LED indicator on the Microphones tab.
C H A P T E R 5
Customizing your settings
39