Smart Technologies SMART Audio 340 - Manual (Page 43)

Setting the response to a page
You can use SMART Audio configuration software to define how your SMART Audio system
responds to an incoming page.
W A R N I N G
Paging systems often deliver important safety information. Have a professional installer connect
the room module to an existing paging system so that pages are heard reliably.
When you install your room module, you can connect it to your existing paging system with either a
paging input or a 6-12V connection.
The Paging tab enables you to do the following:
l
Set paging input trim to your room module.
l
Lower the volume of the current audio to the SMART Audio system when a page is broadcast.
l
Lower the volume on a 6-12V input so that when a page is broadcast at the 6-12V input, the
volume of the current audio lowers automatically.
Setting page volume
You can connect your existing paging system to your room module, and then set the incoming page
volume. The following are common scenarios:
l
Trim the incoming page to -19 dB so that the page doesn’t play over your SMART Audio
system speakers, because it uses other speakers in the room. You can still use the Page
ducking feature for other SMART Audio system inputs. For more information, see Setting the
volume during a page on the next page.
l
Trim to increase or decrease the volume of the page that plays over your SMART Audio
system speakers.
g To increase or decrease the volume of a page
Use the Paging Input Trim arrow buttons on the Paging tab to adjust the page input trim from
-19 dB to 6 dB.
C H A P T E R 5
Customizing your settings
37