Adjusting the speaker tone, Checking your microphone battery level – Smart Technologies SMART Audio 340 User Manual
Page 32
T I P
You can also adjust the volume of inputs at the input source. To adjust the input from the
SMART Audio system microphone, see Controlling an auxiliary audio input device from your
g
To adjust the volume of an auxiliary audio input device
1. Press the SMART Audio icon
on the SMART Notebook software toolbar.
SMART Audio software appears.
2. Slide the input’s volume slider up or down for the input.
g
To mute an auxiliary audio input device
Start SMART Audio software, and then press the un-muted speaker icon
below the input
volume slider.
g
To restore an auxiliary audio input device’s volume
Start SMART Audio software, and then press the muted speaker icon
below the input
volume slider.
Adjusting the speaker tone
The SMART Audio system enables you to adjust the brightness of the speaker tone.
g
To adjust the brightness of the speaker tone
1. Press the SMART Audio icon
on the SMART Notebook software toolbar.
SMART Audio software appears.
2. Locate the Speaker Tone area.
3. Press High, Medium or Low.
Checking your microphone battery level
You can use SMART Audio software to check your microphone battery level.
N O T E
If your microphone battery level is below 10%, the microphone status light flashes red. For more
information, see Troubleshooting using the microphone status light on page 47.
C H A P T E R 4
Using SMART Notebook software to change your settings
26