Sun Microsystems Sun Fire V490 - Manual (Page 126)

98 Sun Fire V490 Server Administration Guide • August 2004
■
Power distribution board
■
Power supplies
■ System controller card
psrinfo Command
The psrinfo command displays the date and time each processor came online.
With the verbose (-v) option, the command displays additional information about
the processors, including their clock speed. The following is sample output from the
psrinfo
command with the -v option.
CODE EXAMPLE 6-14 psrinfo -v Command Output
showrev Command
The showrev command displays revision information for the current hardware and
software.
CODE EXAMPLE 6-15 shows sample output of the showrev command.
CODE EXAMPLE 6-15 showrev Command Output
Status of processor 0 as of: 04/11/03 12:03:45
Processor has been on-line since 04/11/03 10:53:03.
The sparcv9 processor operates at 900 MHz,
and has a sparcv9 floating point processor.
Status of processor 2 as of: 04/11/03 12:03:45
Processor has been on-line since 04/11/03 10:53:05.
The sparcv9 processor operates at 900 MHz,
and has a sparcv9 floating point processor.
Hostname: abc-123
Hostid: cc0ac37f
Release: 5.8
Kernel architecture: sun4u
Application architecture: sparc
Hardware provider: Sun_Microsystems
Domain: Sun.COM
Kernel version: SunOS 5.8 cstone_14:08/01/01 2001