Sun Microsystems Sun Fire V490 - Manual (Page 223)

Chapter 11 Monitoring the System 195
7. Check system temperatures and other environmental data.
To do this:
a. Find the navigation panel at the left side of the RSC GUI.
b. Click the Show Environmental Status item under Server Status and Control.
The Environmental Status window appears.
By default, the Temperatures tab is selected and temperature data from specific
chassis locations are graphed. The green check marks on each tab let you see at a
glance that no problems are found with these subsystems.
If a problem does occur, RSC brings it to your attention by displaying a failure or
warning symbol over each affected graph, and more prominently, in each affected
tab.
Check marks
Warning symbols