Sun Microsystems Sun Fire V490 - Manual (Page 186)

158 Sun Fire V490 Server Administration Guide • August 2004
The system permanently stores the parameter changes and boots automatically if the
OpenBoot variable auto-boot? is set to true (its default value).
What Next
To disable ASR, complete this task:
■ “How to Disable ASR” on page 158
How to Disable ASR
After you disable the automatic system recovery (ASR) feature, it is not activated
again until you enable it at the system ok prompt.
What to Do
1. At the system ok prompt, type:
2. To cause the parameter change to take effect, type:
The system permanently stores the parameter change.
How to Obtain ASR Status Information
Use the following procedure to retrieve information about the status of the
automatic system recovery (ASR) feature.
ok setenv auto-boot-on-error? false
ok reset-all