Sun Microsystems Sun Fire V490 - Manual (Page 164)

136 Sun Fire V490 Server Administration Guide • August 2004
To install a local graphics terminal, you must have:
■ A supported PCI-based graphics frame buffer card and software driver
■
An 8-Bit Color Graphics PCI adapter frame buffer card (Sun part number
X3660A is currently supported)
■
An 8/24-Bit Color Graphics PCI adapter frame buffer card (Sun part number
X3768A is currently supported)
■ A monitor with appropriate resolution
■ A Sun-compatible USB keyboard (Sun USB Type–6 keyboard)
■ A Sun-compatible USB mouse (Sun USB mouse) and mouse pad (if necessary)
What to Do
1. Install the graphics card into an appropriate PCI slot.
Installation must be performed by a qualified service provider. For further
information, see the Sun Fire V490 Server Parts Installation and Removal Guide or
contact your qualified service provider.
2. Attach the monitor video cable to the graphics card’s video port.
Tighten the thumbscrews to secure the connection.
3. Connect the monitor’s power cord to an AC outlet.
4. Connect the keyboard USB cable to any USB port on the back panel.