Sun Microsystems Sun Fire V490 - Manual (Page 187)

Chapter 9 Configuring System Firmware 159
What to Do
1. At the system ok prompt, type:
In the .asr command output, any devices marked disabled have been manually
deconfigured using the asr-disable command. The .asr command also lists
devices that have failed firmware diagnostics and have been automatically
deconfigured by the OpenBoot ASR feature.
2. Display components that have failed POST diagnostics. Type:
3. Display components that have failed OpenBoot diagnostics tests. Type:
What Next
For more information, see:
■ “About Automatic System Recovery” on page 55
■ “How to Enable ASR” on page 157
■ “How to Disable ASR” on page 158
■ “How to Deconfigure a Device Manually” on page 162
■ “How to Reconfigure a Device Manually” on page 163
How to Redirect the System Console
to the System Controller
Perform this procedure if, after installing the Solaris OS and the Sun Remote System
Controller (RSC) software, you want to configure the system to use the system
controller as the system console. For more information about RSC software, see:
■ “About the System Controller (SC) Card” on page 33
■
Sun Remote System Controller (RSC) User’s Guide
ok .asr
ok show-post-results
ok show-obdiag-results