Simrad EQ60 User Manual
Page 108
Simrad EQ60
96
857-164342 / Rev.C
Speed input
External - to be used if navigational data is input from an
external source into EQ60. The current vessel speed value is
shown (when external speed input is selected)
Manual - only to be used if external speed data is unavailable or
unreliable.
Data Input
Data Input - The most recent input data are displayed in a list.
This function is useful during installation and troubleshooting.
Clear - This button clears the list of input telegrams.
Depth Output
This opens the Depth Output dialogue box.
RS-232
This button activates the RS-232 Setup dialogue box. This box
is used to define communication port, baud rate etc. The NMEA
standard specifies 4800 bits per second, 8 bits per character, 1
stop bit, no parity.
Related topics
→
Annotation, page 70
→
Advanced Navigation, page 66
→
Depth Output, page 80
→
RS-232, page 107