Simrad EQ60 - Manual (Page 47)

Getting started
35
857-164342 / Rev.C
• Left: Depth at the cursor position
• Middle: Diameter coverage at the transducer beam at the
current cursor position
• Right: Current gain setting
To change the range, you can also use the mouse wheel. Place
the cursor inside the Range field to do this:
• In a surface related echogram you will modify the range,
while for a bottom related echogram, you will change the
start range.
• If you press the left mouse button while using the mouse
wheel, the surface echogram will change its start value, while
the bottom related echogram will change its range.
Scope view
The Scope view is the rightmost view and shows a scope view
of the last ping corresponding to the settings in the Echogram
view.
This view draws a range of horizontal symmetrical colour lines.
The distance from the vertical center axis and the line colour
reflects the received echo amplitude. A black horizontal line
across the view indicates the current bottom view.
Related topics
→
Display views, introduction, page 15
→ Transceiver Settings, page 114
→ Advanced Transceiver, page 68
→ Bottom Detector, page 75
→ Colour Scale, page 78
→ Echogram, page 81
→ Surface Range, page 110