Simrad EQ60 - Manual (Page 132)

Simrad EQ60
120
857-164342 / Rev.C
Basic procedure
Purpose
The basic installation procedure is presented here. Detailed
technical information can be found in the next chapters. The
applicable page references are made in the procedure.
Parts configuration
Check that you have received all parts required for the
installation; cables, connectors, brackets etc.
Transducer(s)
Install the transducer(s) and the transducer cables according to
the guide-lines in this manual and the drawings provided with
the transducer.
Install the two-wire cable for the temperature sensing thermistor
if applicable.
Display with built-in Processor Unit
Mount the display using the appropriate brackets. Connect the
pointing device.
Stand-alone Processor Unit
The EQ60BB is supplied without the display. Mount the
Processor Unit using the appropriate brackets. Connect the
pointing device.
Note
Make sure that there is a reliable ground connection between the
computer and the ship’s ground.
Connect the computer and display power cables, and the
display’s VGA cable.
General Purpose Transceiver
The General Purpose Transceiver (GPT) is an optional add-on to
the EQ60 echo sounder. It will provide additional transducers
and frequency channels.
Mount the General Purpose Transceiver using the appropriate
brackets.