Simrad EQ60 - Manual (Page 54)

Simrad EQ60
42
857-164342 / Rev.C
To change the pulse length:
1 Position the cursor over the frequency information in the
Header
view, and click the right mouse button.
- The Transceiver Settings dialogue box opens.
2 Move the pulse length slider to the desired pulse length
value.
3 Click Ok.
A small value gives the best resolution, while larger values are
mostly used for navigation and fishing in deep waters.
Related topics
→
Header view, page 20
→ Transceiver Settings, page 114
Changing the transmit power
To change the transmit power:
1 Position the cursor over the frequency information in the
Header
view, and click the right mouse button.
- The Transceiver Settings dialogue box opens.
2 Move the transmit power slider to the desired value.
3 Click Ok.
Related topics
→
Header view, page 20
→ Transceiver Settings, page 114
Setting minimum and maximum depth
Setting the minimum and maximum depth controls where the
echo sounder will search for bottom lock.
Note
Setting both Minimum Depth and Maximum Depth to 0 m will
turn off bottom detection.
1 Position the cursor over the depth information in the
Header view, and click the right mouse button.
- The Bottom detector dialogue box opens.
2 Set minimum and maximum depth to the desired values.
3 Click Ok.