Overview – Sharp SND-5080 User Manual

Page 14

Advertising
background image

overview

14_ overview

Reset Button

Resets the camera settings to the default. Press and hold it for about 5
seconds to turn off the system indicator and restart the system.

J

Resetting the camera requires reconfiguration of network settings (IP
address, subnet mask, gateway address etc.) using the IP Installer
software application.

Power Port

Used to plug the power cable.

GND

Used for earth-grounding.

Network Port

Used to connect a PoE or LAN cable.

I/O Port

ALARM IN

Used to connect the alarm input signal.

ALARM OUT

Used to connect the alarm output signal.

ALARM COM Common port where the alarm output signal is connected.

GND

Used for earth-grounding.

Video Out Port

Video signal output port connected to the monitor.

Advertising