Sharp SND-5080 User Manual

Page 49

Advertising
background image

English _49

M

NETWORK

CONNECTION AND

SETUP

If the IP router has more than one camera connected

Configure the IP related settings and the Port related settings distinctly with each other.

Category

Camera #1

Camera #2

IP related settings

IP Address
Subnet Mask
Gateway

192.168.1.200
255.255.255.0
192.168.1.1

192.168.1.201
255.255.255.0
192.168.1.1

Port related settings

HTTP Port
VNP Port

80
4520

10000
4530

If the <HTTP Port> is set other than 80, you must provide the <Port> number in the address
bar of the Internet browser before you can access the camera.
ex) http://IP address : HTTP Port

http://192.168.1.201:10000

Auto Network Setup

Run <IP Installer.exe> to display the camera search list.
At the initial startup, both [Auto Set] and [Manual Set] will be grayed out.

For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not
support this function.

Select a camera in the search list.
Find the MAC (Ethernet) address labeled
on the rear of the camera.
Both the [Auto Set] and [Manual Set]
buttons will be activated.

Click [Auto Set].
The Auto Setting dialog appears.
The <IP Address>, <Subnet Mask>,
and <Gateway> will be set automatically.

Enter the password.
This is the login password for the
"admin" user who accesses the
camera. The default password is
"4321".

Click [OK].
Auto network setup will be completed.

The camera will automatically complete
the network setting and restart.

M

M

1.

2.

3.

4.

5.

Advertising