Overview – Sharp SND-5080 User Manual

Page 16

Advertising
background image

overview

16_ overview

Inside

Item

Description

Alarm In / Out
terminals

ALARM IN

Used to connect the alarm input signal.

ALARM OUT

Used to connect the alarm output signal.

ALARM COM

Common port where the alarm output signal is connected.

GND

Used for earth-grounding.

SD Memory Card
Compartment

Compartment for the SD memory card.

Reset Button

Resets the camera settings to the default. Press and hold it for about 5
seconds to turn off the system indicator and restart the system.

J

Resetting the camera requires reconfiguration of network settings (IP
address, subnet mask, gateway address etc.) using the IP Installer
software application.

3

Advertising