Symbol Technologies DS6707 - Manual (Page 130)

8 - 10 DS6707 Digital Imager Scanner Product Reference Guide
Stop Bit Select
The stop bit(s) at the end of each transmitted character marks the end of transmission of one character and
prepares the receiving device for the next character in the serial data stream. The number of stop bits selected
(one or two) depends on the number the receiving terminal is programmed to accommodate. Set the number of
stop bits to match host device requirements.
Data Bits
This parameter allows the digital imager scanner to interface with devices requiring a 7-bit or 8-bit ASCII
protocol.
*
1 Stop Bit
2 Stop Bits
7-Bit
*
8-Bit