Symbol Technologies DS6707 - Manual (Page 138)

8 - 18 DS6707 Digital Imager Scanner Product Reference Guide
Nixdorf Beep/LED Options
When Nixdorf Mode B is selected, this indicates when the digital imager scanner should beep and turn on its
LED after a decode.
Ignore Unknown Characters
Unknown characters are characters the host does not recognize. When Send Bar Codes with Unknown
Characters is selected, all bar code data is sent except for unknown characters, and no error beeps sound on
the digital imager scanner. When Do Not Send Bar Codes With Unknown Characters is selected, bar code
data is sent up to the first unknown character and then an error beep will sound on the digital imager scanner.
*
Normal Operation
(Beep/LED immediately after decode)
Beep/LED After Transmission
Beep/LED After CTS Pulse
*
Send Bar Code
(with unknown characters)
Do Not Send Bar Codes
(with unknown characters)