Sanyo DWM-3500 - Manual (Page 11)

-E10-
UHF
VHF
CH 4 CH
O OUT
HANNEL)
IN
VHF/UHF
ANT. ( )
OUT
TV ( )
3 CH 4 CH
VIDEO
AM LOOP
AUDIO AUDIO OUT
(6–CHANNEL)
L
R
IN
VHF/UHF
ANT ( )
OUT
TV ( )
DVD/VCR OUTPUT
FM 75 Ω VHF/UHF
IN (ANT)
75 ohm coaxial
cable (supplied)
Main unit
Splitter
75 ohm input
75/300 ohm outputs
(not supplied)
Main unit
3 CH 4 CH
DIO OUT
CHANNEL)
IN
VHF/UHF
ANT ( )
OUT
TV ( )
UHF
VHF
75 ohm coaxial cable
(supplied)
Splitter
75 ohm input
300 ohm output
(not supplied)
Main unit
TV
TV
TV
Need help? Call
1-800-813-3435
Audio/Video Connection
1. Connect the DVD/VCR OUTPUT VIDEO jack on the main
unit to the video input jack on the TV using the video cable
supplied.
2. If you use your TV’s speaker, connect the DVD/VCR OUTPUT
AUDIO L/R jacks on the main unit to the audio left/right input
jacks on the TV using an audio cables (not supplied).
3 CH 4 CH
S-VIDEO
COMPONENT
VIDEO
AM LOOP
AUDIO AUDIO OUT
(6ÐCHANNEL)
L
R
IN
VHF/UHF
ANT ( )
OUT
TV ( )
Y
P B
P R
DVD OUTPUT DVD/VCR OUTPUT
FM 75½
L R
AUDIO INPUT VIDEO
INPUT
ANTENNA
INPUT
Note:
If you use this connection, set the TV’s source selector to
VIDEO.
Audio cables
(not supplied) Video cable
(supplied)
Main unit
TV
75 ohm coaxial cable
(supplied)
Basic TV Connections
After you have connected the antenna to the main unit, you must
connect the main unit to the TV.
Below are 3 common methods of connecting your main unit to a
TV. Find the type of TV you are using and follow the connection
diagram.
This main unit has a single 75 ohm output for connection to a TV.
If your TV has separate VHF and UHF antenna inputs (Examples
2 and 3 below), use a splitter to connect the main unit to the TV
for VHF and UHF reception.
Example 1: TV with single 75 ohm VHF/UHF antenna input
Note:
If a VHF or UHF antenna is used, set the TV/CATV menu option
to the “TV” mode. (See “TV/CATV selection” on page E25.)
Example 2: TV with 300 ohm UHF and 75 ohm VHF antenna
inputs
Note:
If a VHF or UHF antenna is used, set the TV/CATV menu option
to the “TV” mode. (See “TV/CATV selection” on page E25.)
Example 3: TV with 300 ohm UHF and 300 ohm VHF antenna
inputs
Note:
If a VHF or UHF antenna is used, set the TV/CATV menu option
to the “TV” mode. (See “TV/CATV selection” on page E25.)
2B80201A [E] P01-16 24/2/03, 7:13 PM 10