Sanyo DWM-3500 - Manual (Page 29)

-E28-
Basic Playback
Preparation:
•
Turn ON the TV and set to the video input mode.
• Press [VCR] to select the VCR mode. (The VCR indicator on
the front panel will light.)
1. Load a prerecorded tape. (When loading a cassette tape
without the erase prevention tab, playback will start
automatically.)
2. Press [ a ].
• Playback will start.
• “
a ” will appear on the TV screen for approximately 4
seconds.
To stop playback
Press [ n ].
The tape will stop but remain fully loaded and ready to play.
“
n ” will appear on the TV screen for approximately 4 seconds.
To rewind the tape or forward it rapidly
1. Press [ n ] to stop the playback or recording.
2. To rewind the tape, press [ d ].
• “ d ” will appear on the TV screen for approximately 4
seconds.
To forward the tape, press [ c ].
• “ c ” will appear on the TV screen for approximately 4
seconds.
3. To stop the tape-winding, press [ n ]. To switch to playback
directly (without STOP), press [ a ].
Forward/Reverse picture search mode
When the tape is being winded, you can switch to picture search
mode (see next page). To do this, press [
d ] or [ c ] and hold it
down. The unit will resume the tape winding as soon as the
button is released.
Notes:
•
This VCR selects the playback tape speed SP, LP or SLP
automatically.
• The Cassette tape and DVD disc can be played back
simultaneously. If you press [VCR] or [DVD], the tape playback
and DVD playback alternate with each other on the screen.
a
(Play)
d
VCR DVD
n
(Stop)
c
Need help? Call
1-800-813-3435
VIDEO IN L-AUDIO IN-R
POWER
VOLUME EJECT REC CHANNEL AM/FM VCR/DVD PRESET + - OPEN/CLOSE
STOP PLAY
PLAY a
d c
n STOP
2B80201A [E] P27-37 24/2/03, 7:14 PM 28