Sanyo DWM-3500 - Manual (Page 27)

-E26-
To ADD/DELETE Channels
You can add the channels you want or delete the channels you
do not want manually.
Preparation:
•
Turn ON the TV and set to the video input mode.
• Press [VCR] to select the VCR mode. (The VCR indicator on
the front panel will light.)
1. Repeat the steps 1 ~ 2 in “TV/CATV selection” on page E25.
Then press [ 4 ] or [ 5 ] to select “ADD/DELETE” and press
[ENTER].
á4/5/ENTER/MENUñ
CH SETUP
TV CATV
AUTO CH MEMORY
ADD/DELETE
2. Press the number button(s), [ 4 ] or [ 5 ] to select a channel
number you want to add or delete.
〈 4 / 5 /0-9/ENTER/MENU 〉
ADD CH 003
3. To add channels
Press [ENTER] until “ADD” appears on the screen to set to
add the unmemorized channel.
To delete channels
Press [ENTER] until “DELETE” appears on the screen to set
to delete the channel from memory.
The channel number will blink.
4. Repeat steps 2 ~ 3 to add or delete other channel.
5. Press [SETUP/MENU] until the menu screen is cleared.
Noise Elimination
When you don’t want to receive a weak signal broadcast, the
Blue back screen can be obtained by selecting the NO NOISE
BACKGROUND “ON”.
1. Press [SETUP/MENU].
The “MENU” screen appears on the TV screen.
〈 4 / 5 /ENTER/MENU 〉
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF SAP
CH SETUP
SYSTEM SETUP
SPEAKER SETUP
TVGuardian SETUP
2. Press [ 4 ] or [ 5 ] to select “SYSTEM SETUP”, then press
[ENTER].
〈 4 / 5 /ENTER/MENU 〉
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF SAP
CH SETUP
SYSTEM SETUP
SPEAKER SETUP
TVGuardian SETUP
3. Press [ 4 ] or [ 5 ] to select “NO NOISE BACKGROUND”.
〈 4 / 5 /ENTER/MENU 〉
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME
ON OFF
ON OFF
4. Press [ENTER] to select the “ON” or “OFF” position.
5. Press [SETUP/MENU] until the menu screen is cleared.
Note:
When shipped from factory, the “NO NOISE BACKGROUND”
option is set to the “ON” position.
ENTER
VCR
4 , 5
SETUP/
MENU
2B80201A [E] P17-26 24/2/03, 7:14 PM 26