Sanyo DWM-3500 - Manual (Page 18)

-E17-
Auto Clock Setting
The Auto Clock feature enables the automatic clock setting and
updating, and also to set the Time Zone and Daylight Saving
Time by receiving XDS (Extended Data Service) information
carried on the channel signal.
Preparation:
You must set the antenna connection before the AC cord plug is
inserted into the AC outlet.
Auto clock setting
WAIT 30 MINUTES! when the power switch is off, after the
connections of the antenna and the power plug. Because the
Auto Clock setting feature is activate.
After the clock is set automatically, you may have to set the Time
Zone and Daylight Saving Time.
Press [POWER] to turn on the unit after the Auto Clock operation
completed.
• When shipped from factory, the AUTO CLOCK option is set
to “ON” position.
• If you turn the unit on during Auto Clock setting, the clock is
not set.
• With cable box connection, if the Auto Clock Setting is
unsuccessful, please select the PBS channel carrying the
XDS information, then turn the unit off. After 30 minutes, turn
the unit on, and if the clock is not set automatically, set the
clock manually. (See page E19.)
Time Zone setting (STANDARD TIME)
In the rare event that you live within broadcast range of two
stations in two different time zones, the unit may recognize the
wrong station for the AUTO CLOCK set. To correct the situation:
Preparation:
•
Turn ON the TV.
• When a TV is connected with an audio/video cable, select the
video input mode on the TV.
• When a TV is connected only with an antenna cable, set to
the video channel 3 or 4. Then select VCR position with [TV/
VCR].
• Press [VCR] to select the VCR mode. (The VCR indicator on
the front panel will light.)
1. Press [SETUP/MENU].
The “MENU” screen appears on the TV screen.
〈 4 / 5 /ENTER/MENU 〉
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF SAP
CH SETUP
SYSTEM SETUP
SPEAKER SETUP
TVGuardian SETUP
2. Press [ 4 ] or [ 5 ] to select “SYSTEM SETUP”, then press
[ENTER].
〈 4 / 5 /ENTER/MENU 〉
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF SAP
CH SETUP
SYSTEM SETUP
SPEAKER SETUP
TVGuardian SETUP
3. Press [ 4 ] or [ 5 ] to select “STANDARD TIME”, then press
[ENTER].
〈 4 / 5 /ENTER/MENU 〉
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME
ON OFF
ON OFF
4. Press [ 4 ] or [ 5 ] to select your Time Zone, then press [ENTER].
〈 4 / 5 /ENTER/MENU 〉
STANDARD TIME
ATLANTIC
CENTRAL
PACIFIC EASTERN
MOUNTAIN
ALASKA
HAWAII
AUTO
5. Press [SETUP/MENU] until the menu screen is cleared.
Notes:
• After Auto Clock setting, in some case the clock may display
the other time zone’s. You can correct the clock by selecting
your Time Zone setting above.
• When the clock is not set or you set the clock manually, Time
Zone setting is not available.
ENTER
POWER
4 , 5
1, 5
TV/VCR
VCR
Need help? Call
1-800-813-3435
ADJUSTING THE CLOCK
2B80201A [E] P17-26 24/2/03, 7:13 PM 17