Kathrein UFD 170 - Manual (Page 20)

On Screen Display (OSD)
20
TV / Radio Channel Message
The channel message is displayed for a few seconds each time you
change the programme, or constantly if you press

. The “
i
” indicates
ii
that a channel is being received even if no picture can be seen (e.g. in
radio mode).
The TV symbol indicates a TV channel - adjacent to it is the
selected programme, whether video text can be received and the
current time. The “+” in the third line stands for the programme selection
from the overall list (when selecting from favourites list, an apple symbol
appears instead of the “+”). This is followed by the programme title
and the start and end times of the current programme, if this data is
broadcast by the programme provider.
The message for the set radio channel has the same layout. A radio
unit symbol in the top left-hand corner indicates that it is a radio
channel. Broadcast times and text are only shown if these are
transmitted by the radio broadcaster.
Channel
message
TV
Channel
message
Radio
Error Message
“Weak or no signal” indicates that an error has occurred in the
receiving system or in the receiver settings, or that the transponder is not
sending. The channel message then shows a satellite antenna instead
of the “
i
”. Check the SAT-IF connection and the LNB confi guration. The
ii
list of service settings at the end of this manual can be used to help you
do this.