Kathrein UFD 170 User Manual
Page 63
Important Information on the Turntable before Setup
63
Remote Control
All settings on the UFD 170 are made using the remote control.
This section of the UFD 170 operating manu-
al for the turntable assumes that the UFD 170
and the turntable have been properly
installed and connected, as described in the
installation and operating manuals.
If you have not yet done so, read the safety
instructions at the beginning of this operating
manual and follow them when handling the
UFD 170 and the turntable.
Before setting up your satellite system, make sure
that the location allows a free view to the satellite
positions to the South and is not shadowed by trees or
other obstructions. This will save you time and effort.
Initial Setup Information
Refer to the “Initial Setup” section in the receiver section of this
manual.
reception
no reception