Kathrein UFD 170 - Manual (Page 44)

Password and Child Protection
44
You can use a password to lock your satellite receiver against
unauthorised access by third parties. This protects the receiver against
changes to its reception settings by unauthorised persons. At the same
time, you can activate a child protection function, which locks selected
programmes.
Note: Store your password in a safe place, so that you can access your
channels at all times, even if you have forgotten the password.
The password is set to “0000” in the factory and is inactive.
Password Factory Setting
Press the

key on the remote control to call up the main menu.
Use the

keys to go to the “System Parameters” menu and
confi rm with

. Use the

keys to select the
“Child Protection” menu option and confi rm with

(you may be asked for your password, which you must then enter).
The following screen appears:
Setting the Password and Child Protection
You can now make your settings with the

and the

keys. The following settings are possible:
- Age limit: This setting is only effective if the
corresponding locking signals are broadcast.
- Lock lists: Yes/No. This locks the editing function for
the programme lists.
- Lock installation: Yes/No. This locks the access to the
installation menu.