Kathrein UFD 170 - Manual (Page 22)

Programme Selection
22
This section explains how to select television and radio programmes on
your UFD 170.
The description of the functions assumes that the UFD 170 has been
connected and turned on properly.
Selecting a TV or Radio Programme
To select additional programmes in ascending or descending order
in the programme memory, simply press the

keys after
turning on the UFD 170.
After each change of programme, an on-screen display shows you the
selected programme, the time, the programme start and end times and
the programme title in an information bar (if this data is broadcast by the
programme provider).
You can only receive these programmes with the UFD 170 in
conjunction with a CA module and the appropriate pay TV card
(Smartcard).
Reception Status
You can permantly show or hide this information bar by pressing the

key repeatedly.
For encrypted programmes, you will see the following message:
Note: Programme selection works in exactly the same way in TV and radio
mode. We will therefore only explain how to select TV programmes
here. The procedure for selecting a radio programme is identical to that
described for the TV programmes.