Kathrein UFD 170 - Manual (Page 71)

Special Messages for Turntable
71
Press

to restart the search.
If the search is unsuccessful again, e.g. due to very poor weather
or because you are in a marginal area, reset the search mode from
“Standard” to “Fine” as described below.
Press

to hide the current screen display. Press

in the main
menu and then use the

keys to switch to the “HDP antenna
setup” option. Then press

to go to the HDP menu.
The

keys take you to the “Search Mode” option.
Change the selection from “Standard” to “Fine” using the

keys take you to the “Search Mode” option. keys take you to the “Search Mode” option.

keys.
Note: If this screen does not appear automatically, you can call it up manually
using the

key. key key
Pressing

twice takes you back to the normal screen. Now press

again, followed by the

key.
In “Fine mode”, the search takes slightly longer as searching is now
done at a lower speed and with a smaller search grid.