Kathrein UFD 170 - Manual (Page 24)

Programme Selection
24
Selecting TV/Radio Programmes by Number
You can select a different programme while a programme is
being shown. To enter the programme number, use the number
keys

to

.
You can switch from TV mode to radio mode. To do this, press

on
your remote control. The receiver then switches to the last radio pro-
gramme selected.
You can use the

or

key to return to TV mode.
When switching to radio mode, just as in TV mode you will see a display
for the programme received:
Example: You want to select the programme “DSF” at programme number 15
(programme number assignment is an example). To do this, enter the
numbers

and

. The receiver waiting time for entry of the next
digit is around three seconds.
The procedure for all other programmes - including those with
three-digit programme numbers - is exactly the same.
Switching from a TV Programme to a Radio Programme
In radio mode, the screen goes dark after a few seconds. However,
you can permanently show the channel message by pressing

or hide it again by pressing the key again.