Kenwood NV-701 - Manual (Page 18)

18
Preparation section
Operation of the MULTI CONTROL setting mode
The MULTI CONTROL keys make it possible to perform a number of functions in a simple procedure.
When the MENU key is pressed, items appear in the display according to the MULTI CONTROL key operation,
so you can select the desired mode more intuitively.
You can also use the
4/¢ keys on the remote control unit in the same manner as the MULTI CONTROL keys
on the main unit.
1 Press the MENU key to enter the MULTI CONTROL setting mode.
2 Select an operation mode by pressing the MULTI CONTROL keys repeatedly .
3 Set items by pressing the SET and ENTER keys as described for each item.
MULTI CONTROL key operation
÷ To cancel the MULTI CONTROL setting mode, press the MENU key again.
÷ Press the BACK key on the remote control unit to return to the previous step and restart operation from there. (The
BACK key is inoperative once the message “Press “ENTER” to - - -” has been scrolled.)
÷ Keys on the remote control unit that have the same name as keys on the main unit perform the same functions.
÷ Depending on the source selected, some items may not be displayed.
The following items can be selected by pressing the MULTI CONTROL keys.
“CD Program Play” (This item only appears when CD input is selected and playback is stopped.)
“Recording Options” (This item only appears when a tape is in the tape holder, and does not appear
when TAPE input is selected.)
“Tape Options”
“Audio Options”
“Clock Options”
“Surround Options” (NV-701 only)
Display examples
The volume control can be used to control the current function while in the MULTI CONTROL setting mode.
MULTI CONTROL
SET ENTER
MENU
DEMO
TV
POWER
OSD RETURN
SETUP SET ENTER
DISC SKIP
BACK
CD-R
MULTI CONTROL
P.CALL
CD
DISC SKIP
AUTO
ENTER SET BACK
MULTI CONTROL
P.CALL
VIDEO/6chIN
0 +10 MENU
MD/DVD
0 +10 MENU
NV-301 NV-701
Remote control unit Main unit