Kenwood NV-701 - Manual (Page 45)

Application section
45
\
Selection of a recording type
With this unit, the following edit recording is
possible to suit different situations.
Convenient CD recording
÷ Note that this cassette deck cannot record onto
Metal tapes.
÷ When an edit recording type is selected, random
and repeat playback is automatically canceled.
Recording only the desired track y
Perform this operation during CD playback when the
track you want to record starts . This starts recording of
the track from the beginning. This operation can only be
performed when the CD player is in the play mode
\
CD ONE TRACK RECORDING
If you want to select the track to be recorded while playing a CD
Recording an entire CD u
Perform “CD DIRECT RECORDING” operation while the
CD player is in the stop mode to start recording.
\
CD DIRECT RECORDING
If you want to record a CD with the track order as it is
Recording programmed tracks i
Program the desired tracks from up to 3 CDs in the order
you want and record the programmed playback onto
tape. This operation can only be performed when the CD
player is in the stop mode
\
CD PROGRAM RECORDING
If you want to record only the tracks you want
At the end of a tape, the music is not recorded on the leader tape portion. If you do not want the recording
to be interrupted in the middle, refer to “Recording onto a tape” and start recording on side B.
› Note Note
Regarding CD-TEXT
(Remote control unit only)
When a CD-TEXT disc is played on this unit, it dis-
plays the text information (disc or track title) re-
corded on the CD.
To switch the displayed text information between
the disc title and track title during playback, press
the TEXT DISP. key.
Scrolls the track title display.
CD player’s time display.
Scrolls the disc title display.
(When pressed during playback)
TEXT DISP.
RDS DISP.
RDS DISP.
TEXT DISP.
NV-301 NV-701
W o r l d M u s i c
N e w O r l e a n s
C D 0 1 0 : 0 2
Notes Notes
Recording a digital source o
Perform “DIGITAL REC MODE” operation while the CD
player is in the stop mode to start recording.
DIGITAL SOURCE RECORDING
If you want to record the sound of multichannel digital sound tracks on tape (stereo downmix)