Kenwood NV-701 - Manual (Page 61)

Application section
61
Set the clock before setting the timer.
Timer operation
When the power is ON and neither recording nor playback is executed for 30 minutes or more, the
power is switched off automatically by the Auto Power Save function.
1
Select “Clock Options”.
2
Select “Auto Power Save”.
÷ The auto power save operation does not occur unless
the clock has already been set.
÷ When the TUNER or external input is selected, this
function works only when the volume is set to zero or
the mute function is ON.
4
Select “Everyday” or “One Time”.
÷ To cancel a timer operation, select “Timer off” under
“Timer Play” (in case of timer playback) or “Timer
Recording” (in case of timer recording).
The following items can be selected by pressing the
MULTI CONTROL keys repeatedly.
“Timer off” (Canceled)
“Everyday”
“One Time”
5
Enter the ON time.
6
Enter the OFF time.
+“Select on time” is scrolled in the display
+“Select off time” is scrolled in the display
÷ After entering the “hour”, enter the “minute” with the
same procedure.
÷ After entering the “hour”, enter the “minute” with the
same procedure.
÷ If you have set both a timer recording program and a
timer playback program, leave an interval of 1 minute or
more so that their time ranges do not overlap.
The saved contents cannot be cleared. The
contents are cleared only when they are changed.
The time is
advanced The time is
returned
The time is
advanced The time is
returned
Auto Power Save
(For U.K. and Europe) (Other countries)
(For U.K. and Europe) (Other countries)
MENU
DEMO
MULTI CONTROL
SET
ENTER
MULTI CONTROL
MULTI CONTROL
SET
MULTI CONTROL
SET
MULTI CONTROL
SET
MULTI CONTROL
SET
A M 8 : 0 0 8 : 0 0
S e l e c t o n t i
S e l e c t o f f t
A M 8 : 0 0 8 : 0 0
Continued on next page...
(“CD Program Play”)
(“Recording Options”)
“Tape Options”
“Audio Options”
“Clock Options”
“Surround Options” (NV-701 only)
“A.P.S. OFF”
Auto Power Save is not used.
“A.P.S. ON”
Auto Power Save is used.
“Sleep Timer”
“Adjust Time”
“Timer Play”
“Auto Power Save”
SET
3
Select “A.P.S. ON” or “A.P.S. OFF”.