Kenwood NV-701 - Manual (Page 30)

30
Basic section
A tip for the use of the tape counter
The tape counter is set to “0000” when a cassette tape
is loaded. In case you want to interrupt recording
(playback) in the middle of the tape, the counter read-
ing will be helpful as a reference for locating the same
location when continuing the recording (playback)
the next time. The tape counter figure decrements
during recording or playback of the reverse side
(while the 3 tape transport indicator is lit).
To reset the tape counter to “0000”, open the cassette
holder once. The counter will be reset.
“N–TAPE” or “C–TAPE” appear to indicate whether
the tape in the cassette deck is normal or high bias.
Let's have sound
Lights up when
Dolby NR is on.
The indicators ( 2 , 3) indicate the current direction
in which the tape advances when playback or record-
ing is started automatically by the one-touch opera-
tion function, etc. This direction is the direction stored
in memory when tape playback was last stopped.
(To switch the tape transport direction, press the
TAPE ( 2 3) key to reverse the direction, then press
the
7 (stop) key.)
Transport direction indicators
Tape direction indicators
NR
To reduce noise in playback
You can select Dolby NR (Noise Reduction) to
reduce high frequency noise and improve the
sound of audio playback when listening to
tapes.
1
Select “Tape Options”.
“Tape Options”
“Audio Options”
“Clock Options”
“Surround Options” (NV-
701 only)
The following items can be selected by press-
ing the MULTI CONTROL keys repeatedly.
“Dolby NR–ON”: Add noise reduction
to the audio playback.
“Dolby NR–OFF”: Play the cassette tape
without any noise reduction
processing.
2
Select “Dolby–NR”.
3
Turn Dolby NR on or off.
“Reverse Mode”
“Dolby–NR”
MENU
DEMO
SET
MULTI CONTROL
SET
MULTI CONTROL
MULTI CONTROL
•
SW
R L
N - T A P E 0 0 0 0
4
Save the setting and exit the mode.
ENTER
SET
(SW channel lights for
NV-701 only)