Kenwood NV-701 - Manual (Page 28)

28
Basic section
÷ If the tape transport direction is opposite to the desired direction, press the
TAPE (
2 3) key to reverse the direction.
÷ Normal (TYPE ) or high (TYPE ) tape selection is set automatically.
÷ Remove tape slack before loading.
÷ Close the door securely.
Reverse mode indication
Lights up when a tape is
present in the cassette holder.
•
SW
R L
Active audio channels
(SW channel lights for NV-
701 only)
Let's have sound
1. Load a cassette tape.
2. Select the TAPE input.
Tape playback
1
Open the cassette holder.
2
Insert a tape and close the door.
Be sure to load the top of the
tape in the cassette holder first
with the side you want to play
facing up.
To stop playback
(
7 (stop))
To stop playback
(
7 (stop))
Start playback
(TAPE (
2 3))
÷ Each time you press the TAPE (2 3) key, the playback direction changes.
When the power is off:
By loading a tape in the cassette deck beforehand,
simply pressing the play key automatically turns the
power ON and sets the function selection to Tape.
The deck starts playback.
TAPE
2 2
To wind tape at
high speed
(MULTI CON-
TROL keys)
1 1
2 2
NV-301 NV-701
Playback direction
indication