Kenwood NV-701 - Manual (Page 21)

Preparation section
21
1
Select “Surround Options”.
2
Select “Speakers Distance”.
3
Set the distance to the speakers.
Use the MULTI CONTROL keys to set the distance and SET
to proceed to the next setting. The speaker channels that
the distance is being set for flash in the display.
The following items can be selected by pressing the
MULTI CONTROL keys repeatedly.
“Speakers Distance”
“Input Mode”
“Speaker Selection”
To decrease
the distance To increase
the distance
Front speakers
+“Surround Options” is scrolled in the display
The following items can be selected by pressing the
MULTI CONTROL keys repeatedly.
(“CD Program Play”)
(“Recording Options”)
“Tape Options”
“Audio Options”
“Clock Options”
“Surround Options” (NV-701 only)
÷ Set the distance to the center speaker and surround
speakers in the same way.
÷ The adustable range for all of the speakers is 1 to 30 ft.
(0.3 to 10 m) in 1 ft. (0.3 m) steps.
÷ When the distance settings are complete, set the
volume levels.
+“Speakers Distance” is scrolled in the display
Setting speaker distances and system volume levels
Set the speaker distances and levels accurately for the best possible delivery of sound when listening to
multichannel sources or when applying a digital soundfield to a stereo source.
MENU
DEMO
SET
MULTI CONTROL
SET
MULTI CONTROL
SET
MULTI CONTROL
S u r r o u n d O p t
Continued on next page...
S p e a k e r s D i s
1 f t 0 . 3 m
SW LFE
RS S LS
R C L
Front “R” and “L”
indicators flash
Setting up for surround sound