Kenwood NV-701 - Manual (Page 19)

Preparation section
19
This unit incorporates a clock function. It is necessary to set the correct time before using the timer
functions. The time can be displayed only while the power is in standby.
1
Select “Clock Options”.
2
Select “Adjust Time”.
3
Adjust the hour.
4
Adjust the minute.
5
Start the clock.
Clock adjustment
÷ The time display starts to blink.
÷ Press the SET key. The hour is entered and the minute
display starts to blink.
Example: Setting the time to 8:45 in the morning
The following items can be selected by pressing the
MULTI CONTROL keys repeatedly.
“Sleep Timer”
“Adjust Time”
“Timer Play”
“Auto Power Save”
To decrease
the figure To increase
the figure
(Other countries)
AM12
ÔAM1ÔAM2...
PM1 ÔPM2...ÔAM12 ...
00 Ф01Ф02...59Ф00Ф01...
ч Press the BACK key to return to the previous step and
restart operation from there.
÷ To set the time precisely, press the ENTER key at the
same moment as a time announcement.
To decrease
the figure To increase
the figure
+“Clock Options” is scrolled in the display
(In standby mode or when the MD/DVD (NV-301
only) or VIDEO/6ch IN (NV-701 only) input is
selected.)
÷ The clock is reset and the clock display blinks if the power
cord has been unplugged from the AC power outlet and
plugged in again, or after a power failure. In this case, set
the time again.
(Displayed for approximately 5 seconds)
The following items can be selected by pressing the
MULTI CONTROL keys repeatedly.
(“CD Program Play”)
(“Recording Options”)
“Tape Options”
“Audio Options”
“Clock Options”
“Surround Options” (NV-701 only)
(For U.K. and Europe)
0
Ф1Ф2...13Ф14...Ф0 ...
(Other countries) (For U.K. and Europe)
To display the time
MENU
DEMO
SET
C l o c k O p t i o n
MULTI CONTROL
ENTER
SET
MULTI CONTROL
SET
MULTI CONTROL
MULTI CONTROL
ENTER
A M 8 : 0 0 8 : 0 0
A M 8 : 4 5 8 : 4 5
SET