Kenwood NV-701 - Manual (Page 36)

36
Basic section
Tips in CD recording
When recording CD tracks onto a tape, if you leave
the cassette deck in record-pause mode beforehand,
the cassette deck recording can be started at the same
time as the CD starts to be played (synchronous re-
cording function).
1
Set the CD player in pause mode.
2
Select the track to be recorded with the
MULTI CONTROL (
4, ¢) keys.
(The CD player pauses at the beginning of
the selected track.)
3
Put the cassette deck in record-pause mode.
(Press the SET (
¶) key twice in succession.)
4
Start playing the CD.
(Synchronous recording starts.)
÷ Recording stops when the 7 (stop) key is pressed.
Let's record
Beat cancel function
In some cases, noise may be produced while record-
ing AM (MW/LW) stations. When this occurs, press
the TUNER (BAND) key while the unit is in the record
pause mode to reduce or eliminate the noise for a bet-
ter recording.
TUNER
BAND
÷ Each press switches the beat cancel function on and
off alternately.