Kodak 9090DC - Manual (Page 47)

5-8 A-61662 October 2011
Document Setup screen The Document Setup screen provides the following options.
Document Types — allows you to change the transport speed to
accommodate the feeding needs of various document types.
• Normal: highest transport speed for scanning standard document
types. This is the full performance mode.
• Fragile/Difficult: lower transport speed which is useful for delicate
documents that can easily tear.
• Thick or Envelope: for scanning thick paper or envelopes.
• Tri-Fold: for scanning tri-fold documents.
NOTE: Document types other than Normal may reduce scanner speed.
Allow Large Skew — if enabled, this option maximizes image data
capture for documents that are fed into the scanner highly skewed,
helping to eliminate clipped or missing corners.
Very Long Document — when enabled, this option allows scanning of
extremely long documents (up to 200 m) into individual images. The
size of the images is determined by the Paper Size setting in the
scanning application. Documents longer than the selected paper size
will be imaged as segmented multiple images.
NOTES:
• Starting with scanner firmware version 2.10, the Pause/Stop button
on the scanner control panel can be used in Very Long Document
mode to stop the document in progress allowing you to make any
required feeding adjustments. The document can then be restarted
using the Clear/Restart button.
• The Very Long Document option does not support the simultaneous
use of some other options offered through VRS ImageControls and
Direct Drivers.