Kodak 9090DC - Manual (Page 86)

B-12 A-61662 October 2011
The following options can be set via the Text Controls dialog box:
NOTE: Patch Code functionality is only available with the Kodak
Ngenuity 9150 Scanner.
Page Counter
Enable — click this checkbox to enable the Page Counters.
• Print Width — select to append zeros or spaces in front of the page
count or spaces at the end of the page count to retain a fixed length
for all digits that will appear in the text string. The default is leading
zeros.
For example, if the current counter value is 472, then the text string
for an 8-digit counter appears as follows:
With leading zeros: 00000472
With leading spaces: 472
With trailing spaces: 472
• Start At — when you start a new batch, this option allows you to set
the document count for the next document that will be scanned.
• Step Amount — select a value from the drop-down list to determine
how the automatic imprinter/annotation counter is incremented on
each page. The counter should be set based on the documents being
scanned, how the batches are organized, and specific user needs.
Increment amounts of 0 - 9.
NOTE: When the counter value exceeds the number of digits
selected, the counter value resets to 0, depending on the
increment amount.