Kodak 9090DC - Manual (Page 61)

A-61662 October 2011 6-9
Cleaning the sensors
There are 7 sensors that require regular cleaning. Use only the
supplied blower brush to clean these sensors. Do not use any type of
cotton swab or cloth as these items may leave lint in the sensors.
9. Feeder sensor: Place the brush end of the blower brush into the
feeder sensor area and squeeze the blower brush several times to
clean the feeder sensor.
10. Gap sensor, page entry sensors and pass thru sensor: Open
the scanner cover to clean these 5 sensors by placing the brush
end of the blower brush into the each sensor area and squeeze the
blower brush several times to clean.
Feeder sensor
Top or front page tray assembly
Gap sensor
Page entry
sensors (3)
Pass thru
sensor