Kodak 9090DC - Manual (Page 89)

A-61662 October 2011 B-15
• Offset from Top — specify the distance of the imprinter string from
the top of each page. The default and minimum value is 0.5; the
maximum value is 25.5 inches. You must enter whole numbers for
pixels and millimeters, but you can enter decimal numbers in 0.1-inch
increments for inches.
NOTE: The horizontal location for imprinting must be manually set
inside the scanner.
Print String Definition, Maximum String Length and Remaining
Count — use the Print String Definition text box to set up and/or modify
the text string that you want imprinted or annotated on a document. You
can provide information for the text string by typing a text string in the
text box or inserting pre-formatted information from the Page Counter
and Insert Dynamic Content drop-down lists. You cannot insert text
using the cut and paste function.
You can see how the text string will appear as imprinted or annotated
text in the Actual Printed Example field.
Exceeding the maximum string length of 72 results in the string being
truncated to the maximum length. Because the imprinter/annotation
string is made up of text, a page counter, and dynamic content,
consider their combined length and the character placeholders
remaining (shown in the Remaining Count box) when setting the string
length.
Actual Printed Example — the text displayed under Actual Printed
Example shows how the current imprinting or annotation text will look
with any optional date and time stamp, special content, or page counter
expanded. When a date and time format is specified, the current date
and time are applied.