Kodak 9090DC - Manual (Page 28)

4-8 A-61662 October 2011
Ngenuity Batch
Counter The Ngenuity Batch Counter application can be started from
Start>Programs>Kodak>Ngenuity 9000 Scanner>Ngenuity Batch
Counter.
This application provides two resettable Batch counters which allow
you to keep track of the number of documents scanned in a batch and/
or within a shift.
The top counter can be reset to 0 by clicking the C button next to the
counter. The bottom counter (total counter) will not be reset to 0 if the
top counter is cleared. To clear both counters, click the C button next to
the bottom counter.
Ngenuity Operator
Utility The Ngenuity Operator Utility (NOU) is the application that
communicates with the scanner to provide scanner status, configure
scanner settings and to monitor and assist with performing routine
scanner maintenance.
Be sure your scanner is properly connected and the scanner and
host PC are on before accessing the Ngenuity Operator Utility.
• From the host PC’s desktop, double-click the Ngenuity Operator
Utility icon. The NOU will run through an initialization sequence.
When communication with the scanner is established, the scanner
and connection type will be displayed on the Home screen of the
NOU.
NOTE: Any changes made to NOU settings with the scanner powered
off or disconnected from the PC will not be present when the
scanner is turned on or reconnected.