Kodak 9090DC - Manual (Page 50)

A-61662 October 2011 5-11
Gamma (default) — allows you to specify a specific camera gamma
(1.0 - 2.5). The camera gamma value can be entered or selected by
moving the slider to the desired value.
Select a lower gamma value to enhance color saturation for bright
colors and a higher gamma value to enhance color variations for dark
colors. For most documents the camera gamma should be kept at the
default value of 1.3.
NOTE: Selecting one of these Camera Mode options activates that
option for both the front and back camera.
Multifeed screen The Multifeed screen provides the following options.
Multifeed Mode — determines the response of the scanner if a
multifeed occurs.
• Off: no multifeed detection occurs. Scanning continues and all
scanned images are retained.
• Notify: the scanner responds to the multifeed by sounding an audible
alarm and momentarily lighting the Multifeed LED on the control
panel. Scanning continues, the multifeed is ignored and the image of
the multifeed document is retained.