Kodak 9090DC - Manual (Page 85)

A-61662 October 2011 B-11
Print position: software To set up the software for imprinting, access the Advanced Properties
screen which is accessible within Virtual ReScan® (VRS) Interactive
Viewer.
Scanning applications that use the VRS-based driver will display the
VRS icon in the Windows Taskbar on the host PC as soon as the scan
source is selected.
NOTE: For instructions on how to select the scan source (scanner),
see Chapter 4, Control Panel and Ngenuity Operator Utility.
1. Right-click on the VRS icon located in the Taskbar to launch the
Interactive Viewer.
2. Click Preview.
3. Within the Interactive Viewer, access the Advanced Properties
screen by clicking the Scanner Driver Settings icon (tools image).
4. In the Advanced Properties screen, click on the Imprinter menu item
to display the Imprinter controls.
5. Enable the imprinter you want to use: Front Page Prescan or Back
Page Postscan.
6. Click Text Controls.
NOTE: When VRS is not installed, imprinter controls can be found in
your Direct ISIS and TWAIN settings.