Kenwood AX-7 - Manual (Page 10)

10 EN
Preparations
Basic section
Application section
Knowledge section
System connections
Connecting to the antennas
FM indoor antenna
The provided antenna is for temporary in-
door use only. For stable signal reception,
we recommend to use an outdoor antenna.
Remove the indoor antenna if you connect
to an outdoor antenna.
1
Connect the antenna to the antenna
terminal.
2
Locate the position providing good
reception condition.
3
Fix the antenna.
AM/FM radio stations cannot be received without the proper antenna connections. Connect the anten-
nas properly according to the following instructions.
1 2 3
How to connect the antenna
The supplied antenna is for indoor use. Place it as
far as possible from the main unit, TV set, speaker
cords and POWER cord, and set it to a direction
which provides the best reception.
AM loop antenna
Antenna adaptor
(Commercially
available parts)
FM outdoor antenna
Lead the 75Ω coaxial cable connected to the FM
outdoor antenna into the room and connect it to the
FM 75Ω terminal. Please remove the indoor antenna
after an outdoor antenna has been installed.
AM loop antenna
FM outdoor antenna
FM indoor antenna
Assemble
C-AX7
*5613/08-22/EN 06.1.6, 0:53 PM 10