Kenwood AX-7 - Manual (Page 15)

15 EN
Preparations
Basic section
Application section
Knowledge section
@
VOLUME knob ¢
Used for volume adjustment.
#
INPUT SEL. / MULTI CONTROL knob
In the normal mode, this is used for selecting an input
source.
In the function menu mode (selected by pressing the
MODE key), turn this knob to select the desired menu
item. To set or enter setting of the function menu
item, press the SET key.
Items of function menu mode :
SOUND PRESET º
D.EQ Rec Mode Q
REC LEVEL Q
D.AUDIO OUT p
INPUT LEVEL y
AUTO MEMORY ‚
DIMMER SET ∏
LEVEL METER a
A.P.S. SET a
TIME ADJUST £
TIMER SET Á
AUTO ROOM EQ §
• Some of the items may not be displayed depending on
selected input source.
Used to select a desired item after pressing the
SOUND SELECTOR key to switch to sound setting
mode. Use the SET key for confirmation.
Items of function menu mode :
"SURROUND" ⁄
"D-BASS" •
"TONE" •
$
SOUND SELECTOR key
Used to switch the function of the INPUT SEL./MULTI
CONTROL knob to the sound setting function.
MODE key
Used to switch the function of the INPUT SEL./MULTI
CONTROL knob to menu selection mode.
SET key
During MODE operation: Used to confirm the selected
item.
During SOUND operation: Used to confirm the se-
lected item.
Used to confirm the program No. at the time of DVD/
CD.
%
Clear voice indicator
Tone indicator
A.R. EQ (Auto Room EQ) indicator
Rec. Out indicator
^
SURROUND indicator
L : Left signal indicator
C : Center signal indicator
R : Right signal indicator
LEF : LEF signal indicator
SL/SR/S : Surround signal indicator
Lights according to the number of audio signal
channels of the selected source.
& Display panel
Standby mode
While the standby indicator is lit, a small amount of power is supplied to the unit to back up the memory.
This is called Standby mode. Under the condition, the unit can be turned ON by the remote control unit.
Controls and indicators
*5613/08-22/EN 06.1.6, 0:53 PM 15