Kenwood AX-7 - Manual (Page 80)

80 EN
Preparations
Basic section
Application section
Knowledge section
1
Press the SP SETUP key on the remote con-
trol, press the MULTI CONTROL
@/# keys
to select “SP LEVEL”.
Setting the volume balance
Each time the key is pressed, the mode
switches.
SPEAKER MODE
SP LEVEL
SP DISTANCE
2
Press the ENTER key.
3
When the operation of step 2 is performed,
a test sound is put out and the speakers are
switched automatically.
For a front surround system
For a 5.1 Channel system
Speaker setting
4
Press the MULTI CONTROL %/fi keys to ad-
just the volume.
÷ Adjustment is possible in the range from +10 dB
to -10 dB.
÷ Adjust so that all speakers are heard at the same
volume. Adjust the subwoofer as desired.
5
Press the ENTER key.
÷ The "SP LEVEL" indication blinks.
÷ Press the SP SETUP key to end the operation.
1
Press the SP SETUP key on the remote con-
trol, press the MULTI CONTROL
@/# keys
to select “SP DISTANCE”.
Setting the speaker distance
Each time the key is pressed, the mode
switches.
SPEAKER MODE
SP LEVEL
SP DISTANCE
2
Press the ENTER key.
3
Press the MULTI CONTROL %/fi keys to set
the distance between the listening position
and the speaker "L".
4
Press the MULTI CONTROL @/# keys and
make the settings for the next speaker.
5
Press the ENTER key.
÷ The "SP DISTANCE" indication blinks.
÷ Press the SP SETUP key to end the operation.
The setting mode for the speaker "L" is
reached.
Adjustment is possible in the range from 0.3
m to 9.0 m.
For a front surround system
For a 5.1 Channel system
Make the settings for each speaker with the
operations of the steps
1 to 3.
*5613/72-80/EN 06.1.6, 0:54 PM 80