Kenwood AX-7 - Manual (Page 39)

39 EN
Preparations
Basic section
Application section
Knowledge section
1. Select the tuner input.
Each press of the 6 /BAND key [TUNER/BAND key on the remote]
switches the bands as follows.
FM jAM
2. Preset a radio station in memory.
Collective presetting of stations (AUTO MEMORY) ‚
Follow the procedure in "Collective presetting of stations (AUTO
MEMORY)" to preset automatically the tunable radio stations in your area.
÷ Once the stations are stored with AUTO MEMORY (Auto memory func-
tion) you are not required to repeat this procedure the next time you listen
to radio. However when you shift to another location whereby the broad-
cast station frequencies are different, you will have to re-execute the pre-
setting of stations.
Presetting radio stations manually (Manual preset) w
A station can also be tuned in even when it is not preset. For details,
read "Tuning in to a non-preset radio station (Auto tuning, Manual
tuning)". q
When the TUNER /BAND key is pressed, the unit will automatically be switched on and reception status
will be reached.
Receiving broadcast station
DVD TUNER CONTROL PRE-AMPLIFIER SOUND SELECTOR INPUT SEL. / MULTI CONTROL VOLUME
MODE
SET
D.AUDIO PHONES D.AUDIO
standby
/ timer
0
MUTE
1.
Presetting radio stations manually
(Manual preset) (
3) w
Tuning in to a non-preset
radio station (Auto tun-
ing, Manual tuning) (
3)
q
Tuning in to a non-preset radio station
(Auto tuning, Manual tuning) (
2) q
3.
Continued to next page
PTY r
Presetting radio stations manually
(Manual preset) (
2, 4) w
MAIN UNIT
REMOTE
Select the tuner input.
*5613/39-45/EN 06.1.6, 0:53 PM 39