Kenwood AX-7 - Manual (Page 24)

24 EN
Preparations
Basic section
Application section
Knowledge section
1. Turning the power ( ) on (off).
Pressing the (POWER) key when the unit is ON, turns it off
(Standby mode).
÷ Pressing the DVD/CD 6, D.AUDIO 6 or TUNER/BAND key on the
remote also turns power on and starts playback (reception) of the corre-
sponding input.
÷ When the DVD/CD input is selected while the corresponding disc have
been loaded, it automatically starts to play.
Basic use method
The unit is switched ON or
STANDBY
1.
2.
3.
2. Selecting the desired input sources.
Select a desired input source.
TUNER (Broadcasts) ·
DVD/CD ‹
TAPE/VIDEO1 (External input sources) y
VIDEO2 (External input sources) y
TV y
AUX (External input sources) y
D.AUDIO u
Input level adjustment is possible for TAPE/VIDEO1, VIDEO2, TV, AUX and
D.AUDIO.
÷ Pressing the DVD/CD 6, D.AUDIO 6 or TUNER/BAND key on the
remote selects the corresponding input.
When CD is selected
Continued to next page
DVD TUNER CONTROL PRE-AMPLIFIER SOUND SELECTOR INPUT SEL. / MULTI CONTROL VOLUME
MODE
SET
D.AUDIO PHONES D.AUDIO
standby
/ timer
0
L
R
30 10 5 3 1 0(-dB)
1 2 3 4 5
Muting the sound
temporarily
Listening through headphones
Adjusting volume
Start playback
Start playback
Start playback
MAIN UNIT
REMOTE
Preparation : Set the POWER switch of the M-AX7 to the ON position.
Muting the sound
temporarily
Select a desired
input source.
MAIN UNIT
REMOTE
*5613/23-38/EN 06.1.6, 0:53 PM 24