Kenwood AX-7 - Manual (Page 47)

47 EN
Preparations
Basic section
Application section
Knowledge section
DVD MD TUNER CONTROL PRE-AMPLIFIER SOUND SELECTOR INPUT SEL. / MULTI CONTROL VOLUME
MODE
SET
D.AUDIO PHONES D.AUDIO
standby
/ timer
0
1. Connecting a digital audio player
Listening to the sound of a Kenwood digital audio player
[Connecting a model compatible with digital audio link]
Use the special cable to connect the D.AUDIO IN terminal of this unit with
the headphone terminal of the Kenwood digital audio player.
[Connecting to any other digital audio player]
Use a commercial cord with stereo mini plugs to connect the D.AUDIO IN
terminal of this unit and the headphone terminal of the digital audio player.
When connecting a digital audio player, first switch off the
power for the digital audio player and for this unit before mak-
ing the connection.
Then switch on both units.
÷ The D.AUDIO IN terminal is only for connection of digital audio players. Con-
nect only compatible portable equipment.
2. Set the input to D.AUDIO
When this unit is connected with a special cable to a Kenwood digital audio player compatible with digital
audio link, the digital audio player can be operated from this unit or its remote control.
To skip files /
Fast forward
and backward
To stop
playback
To stop playback
1.
2.
To skip files /
Fast forward and
backward
0
[A model com-
patible with digi-
tal audio link] :
HD20GA7
(only for Europe)
Special cable Stereo mini
plug cable
(commercially
available)
Turn the INPUT SEL./MULTI CONTROL knob to select
“D.AUDIO”. [press the INPUT SELECTOR key on the remote].
[Connecting a model compatible with digital audio link]
÷ When the D.AUDIO 6 key on the remote control is pressed, switching to
digital audio is done and playback starts.
MAIN UNIT REMOTE
To start
playback /
To pause
playback
To start playback /
To pause playback
*5613/46-51/EN 06.1.6, 0:54 PM 47