Kodak i1800 Series - Manual (Page 12)

A-61555 March 2007 2-1
2 Getting Started
Scanner components Front view
1 Power switch — press the power switch on (I) or off (O) as
required.
2 Input elevator — holds documents for scanning. The input
elevator can be set to accommodate stacks of 25-, 100-, 250- or
500-documents (20 lb. bond paper).
3 Input elevator extender — open the input elevator extender to
accommodate long documents.
4 Input elevator side guides — slide the guides in or out to
accommodate the document size you want to scan. Side guides
can be left-, center- and right-adjusted to accommodate
documents of various widths. The side guides can also be locked
into position if desired.
5 Feed module — provides smooth document feeding of various
sizes, thicknesses and textures.
6 Paper present sensor — detects the presence of documents in
the input elevator.
7 Gap release button — allows you to manually adjust the space
between the feed module and separation roller for documents that
require special handling.
1
2
3
4
5
6
7