Kodak i1800 Series - Manual (Page 34)

3-18 A-61555 March 2007
Using the operator
control panel
touchscreen
There are a variety of functions that can be accessed by using the
operator control panel touchscreen. If there are three dots after the
function, another screen will be displayed allowing you to make
additional choices. For more information and procedures for using
these functions, see the following sections.
To navigate through the touchscreen, simply touch the desired function
with your finger. Using any object other than your finger may damage
the touchscreen and void your warranty.
NOTES:
• If all of the functions cannot be displayed on the touchscreen at one
time, it may be necessary to touch the up or down arrow at the right-
edge of the screen to gain access to a desired function.
• Image Addressing, Patch Reading and Batch functionality are
only available for the Kodak i1860 Scanner.
Idle screen — depending on whether image addressing is enabled or
disabled or not available, the Idle screen will appear differently.
When the Idle screen is displayed, you can do the following:
• View the operator log
• Access information about the scanner
• Run the scanner in count only mode
• Perform a print test
• Perform a patch test
• Perform a self test
Image Addressing - disabled Image Addressing - enabled